Descaling is a very critical application in steel mills for removal of scale from slabs and billets before entry into mill stands. This needs high discharge and pressure from 160 bar to 400 bar. Triplex plunger pumps with our unloading valves give a consistent and trouble free operation. Max operating temperature for such applications is 60 *C . Water should be clean water with max particle size of 100 microns and particles concentration not exceeding 100 ppm. Pumps are designed with integral gears and circulating lubrication.

These pumps are designed for boiler feed water temperatures up to 150 *C Plunger RPM are kept low so as to have lower acceleration head at suction. Suction pressure should be kept higher than the vapour pressure of steam for operating temperature of feed water. Pumps are driven by pulley. Due to very high efficiency at low volumes and high pressures, these pumps have advantage over centrifugal pumps for small boilers and small size power plants.

Oil Field tertiary recovery
Barrel filling
Supercritical Extraction
Inlet temperature -30 *C to 5 *C
Inlet Pressure up to 50 bar
Outlet Pressure up to 700 bat
Power from 3 KW to 700 KW

Single acting triplex high pressure pump is rated for as high as 800HP and 70MPa in the oilfield servicing applications such as well flushing, well cementing and well fracturing. It is also widely used in pressure testing and wellhead pressure relief. The field proven design is compact, durable and efficient. It can be skid mount, truck mount; chain-driven or gear-driven as required. Since compatible with industrial standards, it matches with Arison BY520, HT750D, HT5961 and HT6061 transmission cases. To optimize its performance and service life, it is preferable to work at a maximum of 70-80% of it full power and below 270 strokes/min. The performance parameters correspond to intermittent work of less than three hours a day.

We offer a full line of single acting triplex mud pumps, the F Series, rated from 500HP to 1,600HP. Small, compact and efficient, our F series is compatible to the industry-recognized F series. It has longer stroke lengths than the others and therefore less number of strokes per minute is needed for the same output. This special feature increases service life and enhances reliability. It is versatile in application and especially suitable for medium to deep oil wells.

Pump Features:

• Compact, solid design - minimal space required
• Pumps move everything from water to very viscous materials with solids
• Sealless - are environmentally friendly, no seals or packing to leak
• Safe in hazardous areas - air driven - non sparking
• Can run dry without damage
• Self-priming to over 8 meters
• Variable flow - simply regulate the inlet air supply to adjust the pump flow from zero to max flow
• Pump stalls if discharge is closed and restarts when discharge is opened (no heat build-up, or wear)
• Composite, long life diaphragms for heavy duty applications (no diaphragm discs). Surface of diaphragm is smooth and not interrupted by any seals whatsoever
• Operates without any lubrication
• Easy maintenance

Pump Materials

• Polyethylene, PTFE, PE conductive, PTFE conductive
• Aluminum, aluminum coated with PTFE
• Cast Iron
• AISI 316 Industrial and AISI 316L Hygienic version

	08/10	10/25	15/55	25/125	40/315	50/565
Max capacity (l/min)	10	25	55	125	315	565
Max pressure (bar)	8
Nominal port size	1/4"	3/8"	1/2"	1"	1 1/2'	2"
Air connection	R 1/8"	R 1/8"	R 1/4"	R 1/4"	R 1/2"	R 1/2"
Suction lift dry (mWC):
- Ball valves	0.4	1.5	2	4	4	4
- Cylinder valves	1	2	3	4	5	5
Suction lift wet (mWC)	9
Max diameter solids (mm)	2	3	4	7	10	12
Temperature limits - PE	70	70	70	70	70	70
Temperature limits - PTFE	110	110	120	120	120	120
Weight - PE (kg)	0.5	1.6	4.2	9.7	23.8	45.0
Weight - PTFE (kg)	1.5	2.4	6.8	16.5	44.5	87
Material of pump housing	PE, PE Conductive, PTFE or PTFE Conductive
Diaphragm options	TFM/PTFE	NBR, EPDM or TFM/PTFE
Valve balls	PTFE, SS	NBR, EPDM, PTFE, AISI 316, PU
Rod valves	PE, PTFE, PE conductive, PTFE conductive
O-rings	EPDM, FPM, FEP/FPM